Fall Straw Dreamcatcher Wreath

fall straw dreamcatcher wreath clothandpatina 21

Easy peasy, quick and inexpensive Fall straw dreamcatcher wreath. Inspired by my friend Jessica at Pen + Paper Flowers. She has been sharing the most charming collection of Fall leaves that she has been gathering on her walks and the word “gather” has been playing around in my thoughts so much lately. It’s such a touching word in so many ways and wanted to create something special with it in mind. Thank you Jessica for your beautiful posts and inspiration.

Fall Straw Dreamcatcher Wreath clothandpatina 6

With just a few craft supplies you can create this simple dreamcatcher wreath for your home or a quick and easy one for gift giving.

Here’s what you’ll need:
• the inside hoop to a wood embroidery hoop (save the outside piece for another project)
• 8 wood beads (but can use as little or as many as you like)
• natural rafia (a little goes a long way so won’t need too big of a bag)
• wood word of your choice (needs to be a bit smaller than your embroidery hoop)
• hot glue gun and glue sticks
Gather a few strands of the rafia (can be found at any craft store) that you will use to wrap around the embroidery hoop. After I gathered the strands I cut the top to make them even. Glue the end to the hoop and start wrapping. I wrap to the right on an angle. Going on an angle will use less rafia and will go much quicker.
Once the hoop is completely covered, glue the remaining ends down. There will be loose ends around the hoop. You can either trim them or glue them down or leave a few here and there to add to the natural charm.
Next step is to add the rafia to the wood beads. I chose (7) beads for the bottom of my wreath, but you can use as little or as many as you like. Gather a few strands of the rafia and cut the end to make it even. Add a bit of glue to hold the end together and give it a twist. This will make it easier to place inside the wood bead.
If you find the hole is too small in the bead you can carefully widen the hole by taking the pointy end of a pair of scissors, placing it into the hole and twisting the bead around the edge to shave a bit off.  Fall Straw Dreamcatcher Wreath clothandpatina 11 Repeat this step for all of your wood beads that are to go on the bottom of the wreath. Fall Straw Dreamcatcher Wreath clothandpatina 14 Once each bead is filled with the rafia you can glue them onto the hoop. Excuse my glue mess! If you have an excess of glue it is best to wipe it off while the glue is hot : )

If you ever need to remove something that has been hot glued, carefully heat the area up with a hair dryer and gently pull away!
I am always inspired by words and love the word “gather”. It has so many beautiful meanings and is very fitting for this time of year. I found this wood word cutout from Hobby Lobby and it fit just perfectly inside my hoop. I simply glued the wood piece on either side of the hoop.
For the top hoop, I took a few strands of rafia, gave them a twist and pulled it through the wood bead. Again, you may need to make the hole larger in order to pull the rafia all the way through. I drilled a hole through the top of the hoop and ran the rafia through the hole to the inside of the hoop, trimmed the rafia and glued it in place with the hot glue.
And that’t it! You can leave it just the way it is, simple and natural or give it a light spray paint in your favorite Fall color. I created one and left it natural and created a second that I may give a light spray in gold for a little shimmer.

You can glue on flowers or leaves for a bit of pretty. Or another idea would be to add wire to them so you can remove them and change them out for each season. This would also look super cute in the summer with seashells.
Well there you have it! Easy peasy right! I so hope you give this one a try! You don’t have to be super crafty to make this one and it only takes a few things to put this one together.

Let me know if you give this one a try or stop in with any questions you may have.
Happy creating and Happy Fall!

4 thoughts on “Fall Straw Dreamcatcher Wreath

  1. Renee Taverrite

    Hi Tammy. My name is Renee and also live in south Florida. I actually work in PBG and was very excited to see a local gal featured in my favorite magazine! I just love your mix of beachy and shabby. Do you have a shop in the area?? I also have a question about your beautiful cabinet that you painted. How did you finish off the patina on that piece?

    1. clothandpatina Post author

      Hello there!

      And oh my gosh yes, I am so happy to see another Florida gal here! That house is in PGA, also worked there as well for a few years before we moved. Thanks so much for all of your sweet words! The cabinet is teak wood with the standard color underneath and with just a little bit of Annie Sloan chalk paint I weathered it up. I believe in a mix of Paris Grey and the Pure White. I wanted to keep it rustic looking so didn’t do too much sanding and kept a lot of the original color underneath showing through.

      Right now I am online only, but have hopes for getting an airstream one day to reno and sell out of. We are down in Boca right now doing reno on a house I own and then will be moving back up north to somewhere between Jupiter and Stuart.

      Let me know if you have any other questions.


    1. clothandpatina Post author

      Hello there!

      Thank you so much and that is a wonderful idea! Little charms would look so nice on this! Hoping you get to create one. It was super quick and easy.



Leave a Reply