Tag Archives: hometalk

Fall Straw Dreamcatcher Wreath

fall straw dreamcatcher wreath clothandpatina 21

Easy peasy, quick and inexpensive Fall straw dreamcatcher wreath. Inspired by my friend Jessica at Pen + Paper Flowers. She has been sharing the most charming collection of Fall leaves that she has been gathering on her walks and the word “gather” has been playing around in my thoughts so much lately. It’s such a touching word in so many ways and wanted to create something special with it in mind. Thank you Jessica for your beautiful posts and inspiration.

Fall Straw Dreamcatcher Wreath clothandpatina 6

With just a few craft supplies you can create this simple dreamcatcher wreath for your home or a quick and easy one for gift giving.

Here’s what you’ll need:
• the inside hoop to a wood embroidery hoop (save the outside piece for another project)
• 8 wood beads (but can use as little or as many as you like)
• natural rafia (a little goes a long way so won’t need too big of a bag)
• wood word of your choice (needs to be a bit smaller than your embroidery hoop)
• hot glue gun and glue sticks
Fall Straw Dreamcatcher Wreath clothandpatina 7
Gather a few strands of the rafia (can be found at any craft store) that you will use to wrap around the embroidery hoop. After I gathered the strands I cut the top to make them even. Glue the end to the hoop and start wrapping. I wrap to the right on an angle. Going on an angle will use less rafia and will go much quicker.
Fall Straw Dreamcatcher Wreath clothandpatina 8
Once the hoop is completely covered, glue the remaining ends down. There will be loose ends around the hoop. You can either trim them or glue them down or leave a few here and there to add to the natural charm.
Fall Straw Dreamcatcher Wreath clothandpatina 9
Next step is to add the rafia to the wood beads. I chose (7) beads for the bottom of my wreath, but you can use as little or as many as you like. Gather a few strands of the rafia and cut the end to make it even. Add a bit of glue to hold the end together and give it a twist. This will make it easier to place inside the wood bead.
Fall Straw Dreamcatcher Wreath clothandpatina 10
If you find the hole is too small in the bead you can carefully widen the hole by taking the pointy end of a pair of scissors, placing it into the hole and twisting the bead around the edge to shave a bit off. Fall Straw Dreamcatcher Wreath clothandpatina 11Repeat this step for all of your wood beads that are to go on the bottom of the wreath.Fall Straw Dreamcatcher Wreath clothandpatina 14Once each bead is filled with the rafia you can glue them onto the hoop. Excuse my glue mess! If you have an excess of glue it is best to wipe it off while the glue is hot : )

HERE’S A TIP:
If you ever need to remove something that has been hot glued, carefully heat the area up with a hair dryer and gently pull away!
Fall Straw Dreamcatcher Wreath clothandpatina 12
I am always inspired by words and love the word “gather”. It has so many beautiful meanings and is very fitting for this time of year. I found this wood word cutout from Hobby Lobby and it fit just perfectly inside my hoop. I simply glued the wood piece on either side of the hoop.
Fall Straw Dreamcatcher Wreath clothandpatina 13
For the top hoop, I took a few strands of rafia, gave them a twist and pulled it through the wood bead. Again, you may need to make the hole larger in order to pull the rafia all the way through. I drilled a hole through the top of the hoop and ran the rafia through the hole to the inside of the hoop, trimmed the rafia and glued it in place with the hot glue.
Fall Straw Dreamcatcher Wreath clothandpatina 22
And that’t it! You can leave it just the way it is, simple and natural or give it a light spray paint in your favorite Fall color. I created one and left it natural and created a second that I may give a light spray in gold for a little shimmer.

You can glue on flowers or leaves for a bit of pretty. Or another idea would be to add wire to them so you can remove them and change them out for each season. This would also look super cute in the summer with seashells.
fall straw dreamcatcher wreath clothandpatina 21
Well there you have it! Easy peasy right! I so hope you give this one a try! You don’t have to be super crafty to make this one and it only takes a few things to put this one together.

Let me know if you give this one a try or stop in with any questions you may have.
Happy creating and Happy Fall!
tammy

Vintage Buttons and Burlap Messages in Pretty Frames

I wanted to share with you a pretty DIY I shared on Hometalk. Creating a family keepsake or special gift using vintage buttons, a little sparkle, a burlap backdrop and a pretty frame. Yes…please!

vintage buttons and burlap messages in pretty frames, crafts

First things first, and the fun part is choosing what you want your message to say. Typically one word, (Home, Love) a date (your wedding date, a birth date), an initial or even a heart work best. Then onto choosing what and how you would like to display your message. Depending upon what is going inside, you can use a rectangle, square a circle or oval frame.
I like a lot of pretty and a lot of detail.

vintage buttons and burlap messages in pretty frames, crafts

I’ve always had a thing for vintage frames, whether wood or metal. They are always filled with so many pretty details and try to use them as often as I can. Not to say though that this project won’t look just as charming in a new or more simple frame.

vintage buttons and burlap messages in pretty frames, crafts

Depending upon your style and what look you are going for, the painting part is all about personal preference. This is where you can personalize this to fit your style. I like to keep things on the neutral side so always opt for a bit of a white wash. It doesn’t take much paint to weather your frame so a small bottle will do. These small paint bottles are always under a $1.00 and go a long way. I also stock up on the sample containers of paint from my local Home Depot or Lowes to keep on hand. Head over to the returned paint section that is usually right near the paint counter and you can sometimes get these containers for as low as $.59!

vintage buttons and burlap messages in pretty frames, crafts

Unless you want full coverage, I recommend brushing on several light layers of paint. In the end again depending on your style you can leave it painted as it is or grab a piece of sand paper to give it a light distressing. The light sanding brings out the pretty details and lends even more to the vintage look

vintage buttons and burlap messages in pretty frames, crafts

I’ve always been a huge fan of burlap. It has beautiful texture, makes a great back drop for many projects and it’s a wonderful fabric that blends with so many styles. You can find many different colors and variations, but for this project I like the standard shade of burlap. It has an earthy feel and the vintage buttons, especially the mother of pearl stand out nicely.

vintage buttons and burlap messages in pretty frames, crafts

I usually cut the burlap a bit larger than the frame so you have a little room for error or if the burlap should start to fray. At the end of the project you will trim it down to size and fit in your frame. I also cut a piece of cardboard that will go under the burlap and serve as a flat surface for your message. Keep the cardboard under your burlap during this project for support. You will also trim the cardboard down to size at the end along with the burlap.

vintage buttons and burlap messages in pretty frames, crafts

And now for the pretty part! I so love vintage buttons ( who am I kidding, I just love buttons!). There are so many pretty buttons these days if you can’t find the vintage ones though. I even snip them from damaged clothing that we no longer wear and keep them for projects down the road. It’s a sweet way to use buttons from your entire family. I use the neutral ones, but you can get really creative here and pick a color that fits your style. I’ve done a few in the past where I’ve used varying shades of one color and it looks so pretty.

vintage buttons and burlap messages in pretty frames, crafts

I add a bit of sparkle to each of mine, but again that’s all about personal preference. I like the basic clear rhinestone, but colored rhinestones would really pop off of the burlap as well! Rhinestones not your thing, you can add a pretty flower, butterfly or a broken piece of jewelry you have on hand. The buttons are pretty on their own and will look just as nice without the rhinestones though.

vintage buttons and burlap messages in pretty frames, crafts

After choosing your buttons you are going to lay them out for size on the burlap. I always keep the frame near by so I can judge how my message will look inside. (Reminder: keep the cardboard under your burlap for support and keep the project on a flat surface). You can go pretty and mix up the lettering or stick to the basics. Either way have fun! Play around with them until you get the look you want.

vintage buttons and burlap messages in pretty frames, crafts

After all of your buttons have been laid down on the burlap you can either glue them down or hand stitch each button (my personal preference). Hand sewing is super relaxing to me and I really love the way the thread looks in the buttons. It’s another mix of texture and will keep the buttons super secure especially if it’s something you want to pass down to generations.
▪ If you are planning on stitching in each button: Place a tiny drop of glue on the back of the button, just enough to hold it secure so you can sew the buttons without them falling off the burlap. Do not cover the button holes with the glue. It will make it hard to push the needle and thread through.
▪ If you do not want to hand stitch the buttons (the buttons will stay intact without the thread): Place enough glue on the back of each button to hold it secure the the burlap.
This part can be a little tricky. Try to go slow and only pick up one button at a time without disturbing the remaining buttons. Sometimes it works better to use a toothpick to pick up each button, dab on the glue with a toothpick and place back down.
Once all of your buttons have been glued, allow the glue to dry so you can either stitch them down or move to the next step.

vintage buttons and burlap messages in pretty frames, crafts

Size and cut your cardboard to fit into whichever frame you chose before moving on.

vintage buttons and burlap messages in pretty frames, crafts

The photo doesn’t show the glued/stitched buttons, but after your buttons have been glued or stitched onto the burlap, you are going to glue down the finished burlap message to your cardboard. Make sure you know where you want your message to be centered. then glue down the burlap to the cardboard and let dry. Once the glue has dried you can trim the excess burlap and slide the burlap/cardboard into your frame. If you have the original backing to the frame, slide this in as well.

vintage buttons and burlap messages in pretty frames, crafts

A lot of times with vintage frames the backs are ruined but you can fill in the excess space with layers of additional cardboard, chipboard or similar material. I like the back to be just as pretty (definitely not necessary though), so like to use pieces of wallpaper or pretty papers that I have leftover. I wanted this one to hang on the wall so created a small hook on top, but you can purchase the hooks as well and just secure to the back.

vintage buttons and burlap messages in pretty frames, crafts

And there you have it! A personalized keepsake for your home or to pass on to someone special! It’s a fun project that doesn’t take too much time or money, but the outcome is so so pretty!
So hoping this has inspired you to pull out some of those buttons you’ve been storing up and create one of your own! And hooping you don’t already to stop over at Hometalk for more creative ideas! I’d love to hear back from you if you create one of your own and would be even happier to see your finished keepsake!
Happy creating!

tammy

 

Getting The Vintage Look For Less

Getting the vintage look on hometalk with cloth and patinaWow, I can’t believe it’s November already and the holidays will be here in no time! This is absolutely my favorite time of year and am so looking forward to decorating for Fall and Christmas. With the holidays comes lots of family and friends in and out, which means it’s the perfect time to spruce up your home. We all want our guests to feel welcome and want our homes to be a little extra pretty this time of year, right?. (Who doesn’t want to make a lasting impression ?)

I just put together a board over at Hometalk, “Getting The Vintage Look For Less”. A collection of some simple and inexpensive ways to add a bit of vintage flair to your home or space. Are you all familiar with Hometalk? It’s basically a Pinterest site for all things home & garden filled with many many amazing DIY projects! You can share your own projects as well and ask questions in the Hometalk Community. I am relatively new to Hometalk, but am already hooked and can’t wait to fill my site with many wonderful projects. Hop on over, have a look around and would love for you to follow along with me at Cloth and Patina on Hometalk.

Well that’s it for now. Stop back in soon! I’ll be posting a mini Autumn Home Tour later this week. Until then, wishing you a beautiful day!

tammy